Oxygen Sealer
Each oxygen sealer needs its own pipe system, with several collectors, inserted on the right side and power through a cable or battery. You have to use a sealed pipe on the walls you want to run pipe through. To start sealing right click the sealer then click enable seal. You may need more oxygen sealers to seal larger buildings along with more pipes and collectors kept separate from the other systems.
Usage
First get an oxygen collector with a battery in it or power on the left side of it and some leaves around it in the area, then connect pipe to the right of it to the right of an oxygen sealer (all pipes through walls must use sealed oxygen pipe to seal the room) and place a battery in the sealer, then right click the sealer and click enable seal (sealers can only seal a small area and it may take multiple sealers and collectors) (also each sealer needs its own system of pipe and a few collectors)
Crafting Recipe
Thermal Expansion:
Basic Components:
|