Oxygen Sealer: Difference between revisions
Todesguzel (talk | contribs) |
No edit summary |
||
| Line 4: | Line 4: | ||
|stackable= Yes (64) | |stackable= Yes (64) | ||
}} | }} | ||
The Oxygen Sealer is a machine that fills a room with oxygen allowing the user to breathe without [[Oxygen Gear]]. Unlike the [[Oxygen Bubble Distributor]], the Oxygen Sealer contains the oxygen to the room it's in. The sealer must be supplied with power (either from a battery or power supply) and sufficient oxygen. See [[Oxygen Collector]] for supplying oxygen. | |||
The sealer will only work in a room that is completely sealed off from outer space. It can either be a completely closed off room or an [[Air Lock]] can be used, but more sealers may be needed if the room is too large. The sealer must have nothing on top of it in order to work. It is designed to check for a proper seal about every 5 seconds so be sure to give it time to seal. | |||
==Usage== | ==Usage== | ||
First get | First get a powered [[Oxygen Collector]] and some leaves or other oxygen source around it in the area. Then connect oxygen pipe from the collector to the oxygen input side of an oxygen sealer (all pipes through walls must use [[Sealable Oxygen Pipe]] to seal the room). Make sure the sealer is powered, then right click the sealer and click enable seal. It may be necessary to supply the sealer with it's own oxygen supply that is not shared by other machines. | ||
==Crafting Recipe== | ==Crafting Recipe== | ||
Revision as of 21:25, 10 November 2013
The Oxygen Sealer is a machine that fills a room with oxygen allowing the user to breathe without Oxygen Gear. Unlike the Oxygen Bubble Distributor, the Oxygen Sealer contains the oxygen to the room it's in. The sealer must be supplied with power (either from a battery or power supply) and sufficient oxygen. See Oxygen Collector for supplying oxygen.
The sealer will only work in a room that is completely sealed off from outer space. It can either be a completely closed off room or an Air Lock can be used, but more sealers may be needed if the room is too large. The sealer must have nothing on top of it in order to work. It is designed to check for a proper seal about every 5 seconds so be sure to give it time to seal.
Usage
First get a powered Oxygen Collector and some leaves or other oxygen source around it in the area. Then connect oxygen pipe from the collector to the oxygen input side of an oxygen sealer (all pipes through walls must use Sealable Oxygen Pipe to seal the room). Make sure the sealer is powered, then right click the sealer and click enable seal. It may be necessary to supply the sealer with it's own oxygen supply that is not shared by other machines.
Crafting Recipe
Galacticraft 2:
|
|
|
|
|
|
|
| ||
|
|
|
|
Thermal Expansion:
|
|
|
|
|
|
|
|
| ||
|
|
|
|
Basic Components:
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
